Friday, February 27, 2015

GN 21 Stainless Steel Leveling Feet with Turned Base

Today we invite you to check out our GN 21 Stainless Steel Leveling Feet with Turned Base, without lag bolt holes, in metric sizes.

These RoHS-compliant leveling feet have a base of stainless steel, European Standard No. 1.4301 (American Standard Series 304). The threaded stud is of stainless steel, European Standard No. 1.4305 (American Standard Series 303). ISO 4032 Hex nut is stainless steel, European Standard No. 1.4305 (American Standard Series 303), and is a standard part of the assembly.

The following stud types are available: without locknut, with external hexagon below; with locknut, with external hexagon below; without locknut, with flat width below; with locknut, with flat width below; without locknut, with flat width below, internal hexagon above; with locknut, with flat width below, internal hexagon above; without locknut, with flat width below, external hexagon above; with locknut, with flat width below, external hexagon above; with adjustable sleeve; and tapped hex sleeve type. All types can be ordered with or without inlaid non-skid pad of Perbunan® (NBR), 70 Shore A, black. Also available are GN 23 versions, which have lag bolt holes to affix the foot to the surface upon which it is being mounted.

To see our full line of leveling feet, visit Section 7 of our online catalog.

Tuesday, February 10, 2015

GN 129.2 Steel and Stainless Steel Hinges

Today we're introducing our new GN 129.2 Steel and Stainless Steel Hinges, available in metric sizes.

These RoHS-compliant hinges are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. Being mounted from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

Hinges are available in steel, with a zinc-plated, blue passivated finish, European Standard No. 1.4305 stainless steel (American Standard Series 303), or European standard 1.4408 stainless steel (American Standard Series 316). The steel version has a brass, nickel-plated hinge pin and hinge washer; steel hex nut and serrated washer are zinc-plated, with a blue passivated finish. Both stainless steel versions have all stainless steel parts.

To see our entire line of Pull Handles and Access Hardware, visit Section 3 of our online catalog.