Tuesday, June 16, 2015

GN 425.3 Stainless Steel Cabinet U-Handles

Today we're introducing another great new product in our line: GN 425.3 Stainless Steel Cabinet U-Handles, Blank, No Mounting Threads, in metric sizes.

These RoHS-compliant U-handles have no thread and are designed for applications that require the handle to be welded or for applications that require special threads, holes, etc. for mounting. Handle is made of European standard No. 1.4301 stainless steel (American standard 300 series), with a matte shot-blasted finish. Offered lengths range from 125 to 250 mm (4.92 to 9.84 inches). For certain minimum quantities other lengths according to customer requirements are available upon request.

To view our entire line of Pull Handles and Access Hardware, visit Section 3 of our online catalog.

Tuesday, June 2, 2015

GN 927.5 Stainless Steel Clamping Levers with Eccentrical Cam

New to our product line is our GN 927.5 Stainless Steel Clamping Levers with Eccentrical Cam, with Plastic Contact Plate, Tapped Type, in inch and metric sizes.

These RoHS-compliant clamping levers are used for rapid clamping and releasing operations. In contrast to a clamping operation utilizing only threads and a lateral force, these levers permit torque-free clamping via a combined downward vertical and cam actuated motion. The lever has been designed to insure that its movement cannot exceed the maximum clamping position.

Lever and components are all made of stainless steel. Type A has an adjustable contact plate of black technopolymer (Polyacetal POM), glass fiber reinforced, with setting nut of stainless steel. Type B has a fixed contact plate of black technopolymer (Polyamide), glass fiber reinforced. The advantages of the Type A are that the distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut. This permits the maximum clamping force to be set by a simple adjustment. In addition this also allows the selection of a preferred lever position in relation to the clamping lever pin. With these clamping levers, thrust forces of up to 8 kN (1800 lbf) can be obtained.

To view our entire line of Jig, Fixture, and Fastening Components, visit Section 11 of our online catalog.