Tuesday, December 29, 2015

GN 490 Aluminum Adjustable Two-Way Clamping Joints

Today we're introducing our new GN 490 Aluminum Adjustable Two-Way Clamping Joints, available in metric sizes.

These RoHS-compliant clamping joints clamp rods or tubes via a V-groove, allowing a greater Ø tolerance to be bridged. The pressure spring makes clamping and releasing easier.

Clamping joints are available with socket head cap screw or with adjustable lever. Clamp mounting is of aluminum, in either a plain, matte tumbled finish or a black powder coated, textured finish . Socket cap screws are DIN 912 and hexagon nuts are DIN 934; both are made of AISI 304 stainless steel. The GN 300.1 adjustable lever has a zinc die-cast handle with a silver powder coated, textured finish. Insert and screw are AISI 303 stainless steel; spring is AISI 301 stainless steel; spacer bushing is AISI 303 stainless steel.

To see our full line of Tube Clamping Components, visit Section 16 of our online catalog.

Tuesday, December 15, 2015

No. 6312 V Crocodile Clamps with Adjustable Holders

Today we're here to introduce you to our new No. 6312 V Crocodile Clamps with Adjustable Holders, with or without Clamping Bolt or Stud Bolt, available in metric sizes.

These RoHS-compliant Crocodile Clamps are infinitely adjustable, easily expanded for every clamping height. They are used for a variety of clamping applications including those using T-grooves and threaded holes. Compression piece and adjustable holders are connected permanently to the clamp body, so the crocodile clamp can be used quickly. The clamp body is equipped with two varied clamping surfaces and can be easily turned to use one side or the other. Due to the fully assembled construction, this makes for easy set-up and handling on equipment. Crocodile clamps are especially suitable for use on injection molding machines and various presses.

Clamp body, compression piece and back support are tempered steel with galvanized finish. Clamping bolt is DIN 787; stud bolt is DIN 6379; washer is DIN 6340; nut is DIN 6330B. All these components are made of tempered steel with a blackened finish.

To see our full line of Jig, Fixture and Fastening Components, visit Section 11 of our online catalog.

Tuesday, December 1, 2015

GN 711.2 Aluminum Rulers

Today we're introducing our new GN 711.2 Aluminum Rulers with 3.3 mm Mounting Holes, available in metric sizes.

These RoHS-compliant rulers are offered in six different horizontal or vertical configurations. They have imprints that are resistant to weak acids and lye solutions, and against solvents if exposure is brief. A self-adhesive version is available upon request. Also available are accompanying GN 711.3 Aluminum Indicator Arrows.

Rulers and arrows are made of aluminum with natural anodized finish. Their surfaces are imprinted in black with numbers and scale markings etched (i.e., aluminum colored). All ruler versions are offered in lengths from 50 to 1,000 mm.

To see our full line of Control Knobs and accessories, visit Section 9 of our online catalog.