Wednesday, March 30, 2016

GN 7403 Aluminum Breather Strainers with Stainless Steel Mesh

Today we're introducing GN 7403 Aluminum Breather Strainers with Stainless Steel Mesh, available in metric sizes.

These RoHS-compliant breather strainers are used in enclosure and device construction. Mounted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the enclosure and the outside. The outside diameter of the enclosure with the recessed hexagon matches the bolt mounting holes for DIN 3852 threaded pipe connectors.

Any dirt and dust particles carried by a particular medium (such as air or a gaseous substance) are prevented from exiting. This protects the insides of sensitive devices and machinery parts from dirt and pollution and also protects the environment from any exiting dust. Sealing ring is embedded in a radial and plane-sided recess which makes the seal captive, and prevents it from being squeezed out during tightening.

Strainer body is aluminum, with stainless steel mesh of 100 or 500 ┬Ám. Strainer bezel is glass fiber reinforced plastic (Polyamide PA), with seal of NBR synthetic rubber (Perbunan). Versions with both metric and BSPP parallel threads are available.

To see our entire line of Fluid Level Indicators and Components, visit Section 12 of our online catalog.

Wednesday, March 16, 2016

GN 53.1 Plastic Retaining Magnet Assemblies, Disc-Shaped, Without Thread

Greetings! Today we're sharing with you about our new GN 53.1 Plastic Retaining Magnet Assemblies, Disc-Shaped, Without Thread, which are offered in metric sizes.

These RoHS-compliant components are a shielded magnetic assembly. They are primarily used for holding drawings and the like. The ND magnetic material is characterized by a high adhesive force.

Housing is plastic, available in gray, white or red. Magnet is neodymium, iron and boron, NdFeB (ND type). Sizes range from 18 to 40 mm in diameter. Temperature resistant to 175 °F (80°C).

To see our full line of Retaining Magnet Assemblies, visit Section 11 of our online catalog.

Wednesday, March 2, 2016

GN 132.5 Stainless Steel Two-Way Connector Clamps

Today we'd like to tell you about our new GN 132.5 Stainless Steel Two-Way Connector Clamps, available in metric sizes.

These RoHS-compliant connector clamps have clamping bores machined and designed for GN 990 construction tubings or DIN 2391, DIN 2395, and DIN 2462 respectively. Clamps are made of stainless steel, with clamping bores machined. Carriage bolts are DIN 603, A2 stainless steel; cap nuts are DIN 917, A2 stainless steel. Type A features sealing, while Type has plastic washers (Polyacetal POM) and edge ring of Silicon, 40-60 Shore A.

The shape of the clamping screws/nuts prevents the formation of moisture build-up. The Type B version also seals bore holes and threads. The material and design of these connector clamps make them ideal for hygienic applications.

To see our complete line of Tube Clamping Components, visit Section 16 of our online catalog.